Last time out on the boat I noticed that my water was not running on my 2009 280EC. I turned on the galley pump and nothing. The pump would not run. Later I noticed that the circuit breaker for the water pump under the helm had tripped. I reset the circuit breaker (with the galley pump switch turned on) and the pump ran for about 3 to 5 seconds (not sounding normal) and the circuit breaker tripped again. After that 3 to 5 seconds of the pump running the water could run for about 20 seconds before stopping. I repeated the procedure a couple of times with the same results. I am guessing that my water pump is shot but I'm looking for suggestions that might prove otherwise.