For sale: Raymarine C80, Faria twin engine gauge set

LaReaLaRea Alexandria VirginiaPosts: 1,987Member ✭✭✭✭
(Updated to show the ones I've already sold)

I am selling the following items because I no longer need them after recently completing a major helm upgrade.  If interested, send me a PM before I put everything on eBay. 

  • (SOLD) Mercury VesselView 702 single-engine
  • (SOLD) Mercury SmartCraft Gateway multi-engine
  • (SOLD) Mercury VesselView Mobile
  • (SOLD) Mercury fuel tank adapter harness, part # 84-864218
  • Raymarine C80 Classic multifunction display
  • (SOLD) Raymarine RD218 2-kW 18" radar transceiver
  • Faria analog engine gauge set
  • Rinker 360/370 helm main panel
  • [SOLD] Garmin GPS receiver 

Here are the details along with "retail" or typical eBay prices.  I will sell them for less ... make offer.  

Raymarine C80 Classic multifunction display with Navionics US charts updated 7/2016, excellent condition, works perfectly, firmware updated in 2016.  Typical eBay price $500.





Faria analog engine gauge set.  Complete twin-engine set with two multi-gauges, two trim gauges, engine sync and dual tachometer, plus engine sync module.  Chrome bezels in perfect condition.  



Rinker 360/370 helm main panel, plastic with burled wood pattern, excellent condition, no fading, always covered, one minor scratch.  Cutout fits Raymarine C80 Classic.



PM me to discuss or see more photos of any item.  
Post edited by LaRea on

Comments

  • Dream_InnDream_Inn Annapolis, MDPosts: 3,798Member, Moderator mod
    If I new the smartcraft fuel cables would work for my boat, I'd buy them.  I just don't think I can get to my sender's without major teardown.

    Dream 'Inn III -- 2008 400 Express

  • J3ffJ3ff Posts: 1,248Member ✭✭✭
    that vv702 has my mouth watering.. I'm just out of boat units for a while :( 
  • LaReaLaRea Alexandria VirginiaPosts: 1,987Member ✭✭✭✭
    edited May 8
    @Dream_Inn - the fuel cable shown above fits the 350 engine (I think).  Your 496 engines would use the 84-859743T03 cable, which is what I now have.

    If you have good schematics for your boat, maybe there's some other place you could tap into the sender wire.  On my boat, I was able to reach the stbd sender from the engine room (with some contortions), and the port sender from under the settee.  

    Stay tuned for a long post on my new helm installation after I finish.
  • Cableguy GregCableguy Greg Pittsburgh, PAPosts: 2,914Member ✭✭✭✭✭
    I agree that the VV702 has me interested... I am also out of boat bucks. The closest that I am going to get to having VV this year is running the data cable from the engine room to the helm.
    2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA
    Go Steelers!!!
  • Handymans342Handymans342 Cape Coral, FLPosts: 5,226Member ✭✭✭✭✭
    Visa check lol
  • StodgeStodge Lake St. ClairPosts: 1,295Member ✭✭✭
    I'd be interested in the fuel sender harness if DI is going to pass on them.

    2002 FV 342 on Lake St. Clair - Past Commodore SHC - Vessel Examiner USCGAUX

  • Dream_InnDream_Inn Annapolis, MDPosts: 3,798Member, Moderator mod
    Stodge said:
    I'd be interested in the fuel sender harness if DI is going to pass on them.


    I'm passing, they won't work on my boat.

    Dream 'Inn III -- 2008 400 Express

  • bry1429bry1429 Southern Lake MichiganPosts: 188Member ✭✭✭
    edited May 8
    I agree that the VV702 has me interested... I am also out of boat bucks. The closest that I am going to get to having VV this year is running the data cable from the engine room to the helm.
    Or you can hit one of those shady "GOLD-INTO-CASH" joints If you have any old gold chains from your glory days of hitting the club's and showing off some of your newest dance moves while sporting the freshest line of cologne to impress the ladies as you suck back a dozen glasses of liquid courage (long island ice teas) B)   I know that thought crossed my mind last year when I was robbing Peter to pay Paul or in my case I was robbing Peter to pay M.T to buy his now my 360 ! HAHAHA :D
    Post edited by bry1429 on
  • Cableguy GregCableguy Greg Pittsburgh, PAPosts: 2,914Member ✭✭✭✭✭
    Is the VVM module still available? @JM_PGH , would you be interested in it?
    2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA
    Go Steelers!!!
  • Michael TMichael T Posts: 5,923Member ✭✭✭✭✭

    @bry1429......The Admiral and I are so happy that you managed to find some of that 80s gold! :-) ....with your new 360 you won't need the cologne to attract a crowd. Notice I said a crowd - not the ladies - as you already have an awesome Admiral!

    However, with your new sound system you will still be able to display your latest dance moves and that Rinker blender and ice maker should keep everyone within shouting distance in drinks!

  • LaReaLaRea Alexandria VirginiaPosts: 1,987Member ✭✭✭✭
    The VVM is available.  I've been too busy to sell anything yet!
  • Michael TMichael T Posts: 5,923Member ✭✭✭✭✭
    @LaRea, as you always do an awesome job with your mods, I bet I am not alone in asking you to post some pictures of your up-dated helm.
  • LaReaLaRea Alexandria VirginiaPosts: 1,987Member ✭✭✭✭
    @Michael T - you know a lengthy post is in the works!  I've been working on this project for two years, and I'm looking forward to the day soon when I can call it done.  (I chuckled asI typed the word "done," because I've never had a boat that wasn't a work in progress.)
  • WildboatingWildboating Cleveland, OHPosts: 750Member ✭✭✭
    Message sent

    2003 Rinker 342 Fiesta Vee, 350 Mag MPI, Bravo 3 2.20:1 w/ 22p 4 x4 props

  • rasburyrasbury Sanford, FLPosts: 3,594Member ✭✭✭✭
    I'm so far behind the times, I don't even know what any of this stuff is!
  • LaReaLaRea Alexandria VirginiaPosts: 1,987Member ✭✭✭✭
    C'mon Ras, the analog gauges and the Raymarine bits were built around the same time your boat was born!  But, yeah I know I'm a gadget freak.  If I tried to deny it, nobody would listen.
  • summerxsummerx Middle river, MDPosts: 179Member ✭✭
    The C80 is tempting to me.  my unit stopped powering up last season and I haven't replaced it yet.  I was planning to move to a new touch screen garmin or raymarine.  However, I never use my radar and don't feel the need to spend $2k+  to purchase a unit and radome.  However, if I just replace the c80, I would still have operational radar if I wanted it....hmmm
  • Dude_HimselfDude_Himself Posts: 86Member ✭✭
    I'm interested in the VV Mobile... I'll message you.
  • TrashmanTrashman New Jersey/ philaPosts: 358Member ✭✭✭
    Just took shipment of my new to me gateway.  Thanks Chris for the super fast shipping and answering all my questions.
    ...  Now, can't wait to receive my simrad nmea starter kit.  
  • AquaVinoAquaVino Posts: 2Member
    Have you sold the gauges 
  • LaReaLaRea Alexandria VirginiaPosts: 1,987Member ✭✭✭✭
    Gauges still for sale.  No reasonable offer refused.
Sign In or Register to comment.