Alpha gen11

frenchshipfrenchship Québec ,CanadaPosts: 1,072Member ✭✭✭
Can both u-joint on the drive shaft be replace whiteout removing the drive shaft from the sterndrives.
thanks
Paul

Best Answer

Answers

  • zaverin1zaverin1 Saint Clair Shores,MIPosts: 803Member ✭✭✭
    edited May 2016
    No
    drive has to be pulled. Some gen 1 alphas have zirk fittings on u j's but most gen 2 or new u joints have no zerks.
  • frenchshipfrenchship Québec ,CanadaPosts: 1,072Member ✭✭✭
    I know that the drive as to be pull out but does the drive shaft has to be remove from the sterndrive completely
  • 212rowboat212rowboat Posts: 2,000Member ✭✭✭✭✭
    it's clumsy to handle, but, sure- they can be pressed out w/o removing the shaft. 
  • zaverin1zaverin1 Saint Clair Shores,MIPosts: 803Member ✭✭✭
    no need to remove entire shaft.They work and can be removed like any other u joint assembly.
  • AlswaggAlswagg Posts: 1,832Member ✭✭✭✭✭
    Not advisable to leave in the drive. Why not simply remove the shaft?  Easy to do.  Than you can also replace the upper seal. And also the work can be done on the bench.  I suspect you will break the spanner nut if you try to leave in.  
  • frenchshipfrenchship Québec ,CanadaPosts: 1,072Member ✭✭✭
    Thanks Al I will let my brother in law know about your advice.
    Paul
Sign In or Register to comment.