Anybody know where I can find these?

HamdogHamdog Lee's Ford Marina, Lake Cumberland in KYPosts: 247Member ✭✭
The 3 light covers on the radar arch.
"Wetted" Bliss 2005 Rinker 342 - Black Hull - Twin Mercruiser 350 Mags - BIII's

Comments

  • ChillLaxinChillLaxin LI, NYPosts: 28Member ✭✭
    "What are those!!" Sorry, couldn't resist. My 14 and 11 year old boys are always saying that...... I digress. lol
  • BayrunnerBayrunner Seneca Creek, MarylandPosts: 134Member ✭✭
    Try here first http://greatlakesskipper.com/ and if you don't find it go on Ebay and search Rinker Boat parts.
    Bayrunner -- FV312 - Simple Pleasure
  • Cableguy GregCableguy Greg Pittsburgh, PAPosts: 2,991Member ✭✭✭✭✭
    Great Lakes Skipper has some. Measure yours before you buy.
    2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA
    Go Steelers!!!
  • HamdogHamdog Lee's Ford Marina, Lake Cumberland in KYPosts: 247Member ✭✭
    Ok. What do you even call "those"? I searched but could not find.
    "Wetted" Bliss 2005 Rinker 342 - Black Hull - Twin Mercruiser 350 Mags - BIII's
  • AlswaggAlswagg Posts: 1,829Member ✭✭✭✭✭
    I will look. Possibly just possibly 
  • BayrunnerBayrunner Seneca Creek, MarylandPosts: 134Member ✭✭
    edited May 2016

    RINKER 220590 CREAM 420 PLASTIC 15 X 7 INCH BOAT ARCH PLATE and you can find it at the Great Lake Skipper website for 9.95.  remember to measure yours.

    Bayrunner -- FV312 - Simple Pleasure
  • Cableguy GregCableguy Greg Pittsburgh, PAPosts: 2,991Member ✭✭✭✭✭
    When you replace them, get the ITC tricolor lights. They will make your boat look pretty cool.
    2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA
    Go Steelers!!!
  • Michael TMichael T Posts: 5,973Member ✭✭✭✭✭
    Jerry, I bought two extras from Rinker for my former 360 as I was worried they would crack at some point. they shipped them to me in bubble wrap. There is a company who makes them for Rinker. it may be called Jet Products? Others may carry them but I know for a fact that Rinker does.
  • diggin2day1diggin2day1 Long Island, NYPosts: 920Member ✭✭✭
    Make them out of King Starboard...
  • ChillLaxinChillLaxin LI, NYPosts: 28Member ✭✭
    edited May 2016
    Pretty cool, diggin. They look great!
  • Dream_InnDream_Inn Annapolis, MDPosts: 3,886Member, Moderator mod
    Looks great Diggin'!

    Dream 'Inn III -- 2008 400 Express

  • HamdogHamdog Lee's Ford Marina, Lake Cumberland in KYPosts: 247Member ✭✭
    Neither Great Lakes Skipper or EBay have the ones I need. Mine only have 4 screws. I checked Amazon as well.
    "Wetted" Bliss 2005 Rinker 342 - Black Hull - Twin Mercruiser 350 Mags - BIII's
  • Cableguy GregCableguy Greg Pittsburgh, PAPosts: 2,991Member ✭✭✭✭✭
    Doesn't Rinker have them? I just looked at a 2016 290EC that Happy Days Boating has in stock and it looks like they are still using that style in the photos. They might not be the same color, but it might be worth a shot to ask them if you already haven't. Heck, they told me that they no longer had my boot stripe, but they found some for me, at $6/foot. The dealer is selling it to me at $3.25/foot, which is still highway robbery. Once I get some, hullstripes dot com told me he could make a 150' roll a heck of a lot cheaper than what I can get it thru Rinker.
    2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA
    Go Steelers!!!
  • Michael TMichael T Posts: 5,973Member ✭✭✭✭✭
    Yes guys, as my e.mail above states, I just purchased two from Rinker. I think Jet Technologies makes them for Rinker, I know JT used to make a lot of parts for Rinker.
  • HamdogHamdog Lee's Ford Marina, Lake Cumberland in KYPosts: 247Member ✭✭
    Thanks guys. Received from Rinker. All three for $120. Ofelia Jimenez filled the order. She is the Office Manager. 574-970-5188. Ojimenez@rinkerboats.com as Shelby posted in an earlier discussion.
    "Wetted" Bliss 2005 Rinker 342 - Black Hull - Twin Mercruiser 350 Mags - BIII's
  • diggin2day1diggin2day1 Long Island, NYPosts: 920Member ✭✭✭
    edited October 10
    ...
  • diggin2day1diggin2day1 Long Island, NYPosts: 920Member ✭✭✭
     x
  • rasburyrasbury Sanford, FLPosts: 3,737Member ✭✭✭✭
    sweet!
  • jbendixjbendix Posts: 10Member
    Nice!
  • MarkBMarkB OntarioPosts: 2,995Member ✭✭✭✭✭
    digging, how did you round the edges off?

    Boat Name: King Kong

    "Boat + Water = Fun"

  • diggin2day1diggin2day1 Long Island, NYPosts: 920Member ✭✭✭
    MarkB said:
    digging, how did you round the edges off?
    Those were the ones I made with a hand-held router... the new arch plates I make are made with a CNC.
  • Handymans342Handymans342 Cape Coral, FLPosts: 5,371Member ✭✭✭✭✭
    They look great installed Mark
  • MarkBMarkB OntarioPosts: 2,995Member ✭✭✭✭✭
    Nice. Is that one of your toys, diggin?

    Boat Name: King Kong

    "Boat + Water = Fun"

  • diggin2day1diggin2day1 Long Island, NYPosts: 920Member ✭✭✭
    MarkB said:
    Nice. Is that one of your toys, diggin?
    Yes, sir!!
  • MarkBMarkB OntarioPosts: 2,995Member ✭✭✭✭✭
    Do you make Christmas presents with that? LOL. I can just see the whole family getting CNC plates, cups, holders, whatever.

    Boat Name: King Kong

    "Boat + Water = Fun"

  • diggin2day1diggin2day1 Long Island, NYPosts: 920Member ✭✭✭
    MarkB said:
    Do you make Christmas presents with that? LOL. I can just see the whole family getting CNC plates, cups, holders, whatever.
    My wife has a long list of demands from that CNC machine... lol. I am also a board member on our youth football organization and they want me to make some of the trophies/plaques... there’s just not enough time in the day!!!
  • Michael TMichael T Posts: 5,973Member ✭✭✭✭✭
    .....and who bought that machine?????
  • reneechris14reneechris14 Pawcatuck river CTPosts: 1,048Member ✭✭✭
    Hey now the primary purpose of that machine is to produce Rinker parts other things are going to have to wait. Just saying.
    2005 Rinker FV342  boat name "Ten Forty"  Pawcatuck river,Ct
  • diggin2day1diggin2day1 Long Island, NYPosts: 920Member ✭✭✭
    Listen, I AM THE BOSS IN MY HOUSE... and I have my wife’s permission to say that. 
Sign In or Register to comment.